T+ 49 231 438-2861 (Head Office)
F+ 49 231 438-26 34
One of the essential prerequisites and core points of the international (ISO) as well as the European QM standard series (EN) is the monitoring of measuring and testing equipment. This ensures that only properly operating measuring and testing equipment is used from the development to the marketing phases of a product and that comparable measurement results are obtained. Therefore, measuring and testing equipment must be compared (or “calibrated”) at regular intervals with the standards created for the respective measured variable.
The Calibration Laboratory of innogy SE, Eurotest (DAkkS Registration No.: D-K-20575-01-00)* is accredited according to DIN EN ISO/IEC 17025. It not only monitors and calibrates the majority of the measuring equipment used in its own testing laboratory but also offers, for example, a DAkkS calibration of sources and measuring instruments for the following measured variables as a service:
|Direct voltage:||10 mV up to 1100 V|
|Direct current strength:||10 µA up to 20 A|
|Direct current resistance:||1 Ω up to 100 MΩ|
22 mV up to 1100 V
10 Hz up to 1 MHz
|Alternating current strength:||
1 mA up to 20 A
10 Hz up to 10 kHz
|Temperature:||-30 °C up to 200 °C|
For further measured variables of sources and measuring instruments we offer factory calibrations.
* The Accreditation is only valid for the in the accreditation-attachment (DAkkS Registration No: D-K-20575-01-00) documented accreditation scope.